I am not clever, But if you think of an old single cylinder BSA, There is no rotor arm, So just a wire to the dist'
From the coil and the other + feed wire to the coil.
The 2 ended coil I used had to be for Points !!, Not electric ignition, Different ohms !.
Len has used it for years, I didn't trust it so carried all the standard stuff, Easy to change back,
I was out "Testing ", Playing silly beggers, And it made a bad noise, Smelt really bad and stopped !!.
My timed breather pinion came loose on the alloy centre and took the teeth off the fibre pinion.
I was testing for performance with the wasted spark, Some say you loose a bit of power, But I found it was fine,
Till it went bang , Long push on a very hot day, Too old for this !.
I fixed it in a few days and have been out since.
From the coil and the other + feed wire to the coil.
The 2 ended coil I used had to be for Points !!, Not electric ignition, Different ohms !.
Len has used it for years, I didn't trust it so carried all the standard stuff, Easy to change back,
I was out "Testing ", Playing silly beggers, And it made a bad noise, Smelt really bad and stopped !!.
My timed breather pinion came loose on the alloy centre and took the teeth off the fibre pinion.
I was testing for performance with the wasted spark, Some say you loose a bit of power, But I found it was fine,
Till it went bang , Long push on a very hot day, Too old for this !.
I fixed it in a few days and have been out since.