Go out for a ride? (I'll wait for the frost to clear first.)What else would we do with our time !!. Cheers Bill.
Go out for a ride? (I'll wait for the frost to clear first.)What else would we do with our time !!. Cheers Bill.
Even though you say you won't ride it hard, Poor old Comet's have a hard time !, Well mine does !.
The rev's at 70 mph are a bit high, I tried a twin rear sprocket, But with my size and the stuff I carry, I needed more Power.
Just seen in MPH, Graham is soon doing a bit on wonky barrels, I had a bad one on my L/ning when it nipped up at 7 thou clearance, So now 10 .thou. Good Luck, Bill.
That's the way to think !, I have a 45 tooth rear sprocket for my 560 cc, I always was a dreamer, And it's all I have left, So I will have to slim down a bit !, I file the pockets off the big type pistons ,You see you need those files again !! The valves tend to rub the inside with Mk2 cams,, I ran 12 to 1 in the 70s on petrol, On the road and track, When it was like Avgas at the pumps. All Good Fun, Bill.Well I could use an E7/10AS, MK2, a TT Carb that I have.....and I weigh about 175lbs with all the gear on, so maybe the twin sprocket will work for me?
I heard there was a coarse bastard in the Vancouver Section, but I didn't believe it!
That's one of the credentials required for being a Section Member here!Its not like that makes me an outcast..... I'm in good company as there is quite a selection here.
PS... I didn't realize that avatar was a black sheep. Kinda looks like a swamp donkey that was a refugee from a forest fire.