That's it rapcom! saves lots of worried work with a screwdriver and it wont slip off
View attachment 12139
Having made the tool for tightening securely, then sleepless paranoics like me need one of these:
"The Bob Cottam Patent G34 Constant Clockwise Torque Application Tool"
I, er, made it meself. Once fitted into the slot of the tightened G34,and retained by a 1/4 BSF bolt, a H31 brake shoe return spring is fitted to the hole at the rearmost end, and the spring is anchored,under slight tension, to a tab retained under the nearest nut that retains the FT5 plate. Thus the tool positively locks the G34, and applies/maintains a modest tightening torque constantly,via the spring tension. The tool arm has of course have to be brazed/ welded to the boss with the correct orientation to suit wherever the G34 slot comes to rest when tightened fully in any given engine, leaving clearence also from the dynamo clamp , and bent down to clear the dynamo body itself. It sits unobtrusive and largely hidden from view, giving me restful sleep.......... Bob.