The T32 valve needs to be open at all times other than when you are disassembling the bike. It is only there to hold the oil in the tank on disassembly. When assembled the valve must be fully lifted to allow oil flow to the engine.I have worked it out and all is good no more Sumping the problem was T32 oil stop valve was completely stuck so I ground it in, now everything is working good I have a little bit of oil in the sump but engine does not smoke when I fire her up and it scavenges that little bit of oil back in the oil tank/UFM so thanks for the info I love solving problems and fixing them, also no more oil tap to worry about wicked. To Vibrac dont worry mt theres always a way worrying dont get you no where. Ash.
Glen
Last edited: