What's the best 'stuff' to put on stainless threads to stop them binding up?
What I am saying, is reduce the outer diameter of the screw, and increase the hole in the nut. Truncate the thread form, leaving the flanks as they are, providing they are right in the first place.If i get you right you are saying to run a die down the thread and a tap through the nut?Plain English please for the non engineers out here
Further to that, yes all threads on your machine should be assembled with a barrier of sorts. I suggest wet or dry molycote. Even parts together need a barrier. Think hinge brackets on rear mudguards, a smear of lanolin or chromate solution, will stop the galvanic reaction. Spoke nipples in alloy rims, is another place to protect.What I am saying, is reduce the outer diameter of the screw, and increase the hole in the nut. Truncate the thread form, leaving the flanks as they are, providing they are right in the first place.