Hello VOC Experts--need some advice
Problem:
Warm or cold idle is not reliable as I come to a stop. On a fast stop even I can experience bike just going dead-but easily re-started thereater. Sitting, the bike will idle generally fine. Trying to set up a reliable idle with New Amal 276's from Coventry
Background:
Series B (2501) with Alton 12V, BTH Mag both <3rs; new replacement 276's with new dual throttle set up and cables. I do notice that my BTH lead cases have become somewhat melted on exhaust fin (cables were to close)...I put electrical tape around the casing damage--could this be the issue as has happened around the time of my new carb install?
What I have tried:
1. Adjust mixture, 2. set throttle stops 3. new spark plugs. (B6's w .16 gap)
What should I try?
Thx so much
Mark
Problem:
Warm or cold idle is not reliable as I come to a stop. On a fast stop even I can experience bike just going dead-but easily re-started thereater. Sitting, the bike will idle generally fine. Trying to set up a reliable idle with New Amal 276's from Coventry
Background:
Series B (2501) with Alton 12V, BTH Mag both <3rs; new replacement 276's with new dual throttle set up and cables. I do notice that my BTH lead cases have become somewhat melted on exhaust fin (cables were to close)...I put electrical tape around the casing damage--could this be the issue as has happened around the time of my new carb install?
What I have tried:
1. Adjust mixture, 2. set throttle stops 3. new spark plugs. (B6's w .16 gap)
What should I try?
Thx so much
Mark