• Welcome to the website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Hon. Editor and Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this website.

    If you have previously registered to use this forum, you should log in now. CLICK HERE.

    If you have never registered to use this website before, please CLICK HERE.

F: Frame Lightning RH footrest plate and gearchanges


vibrac

Well Known and Active Website User
VOC Member
This plate F108/1 is secured at the top by a bolt 687 ( see MO62) and a spacer (as its smaller than 1/2") in the hole that on a standard bike takes the battery tray and footrest through bolt
Bear in mind that we are told on a standard bike that the battery tray and footrest through bolt fit and tightness can influence the gearchange
Perhaps this should be rephrased as the presence of the tray and bolt can upset the gearchange if poorly adjusted but leaving it out is OK as demonstrated by the lightning assembly and perhaps some Eglis am I right?
 

Latest Forum Threads

Top