• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Vincent Tool kit

Vic Youel

Well Known and Active Forum Website User
Non-VOC Member
Whilst studying drawing MO33 and the original (orange covers) and Harper (blue covers) parts list I am wondering about the following:

1. Does anybody know what the purpose or special use of K19. It is an open ended 1/8 inch Whitworth (3/16 BSF) tapered item with jaws at only one end.

2. What are the relative approximate sizes/lengths of the two screw drivers K12 (described as large in KTB) and the other one K12A (with beech inserts in the handle) described as small in the parts original list. Harpers no longer listed them by the way.

Can anyone shed some light on these two queries?

Thanks

Vic
 
Warning! This thread is more than 10yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Top