I am in the process of fitting new drums, backing plates etc acquired from Erich - north German section..
With the speedo drive gear in place the backing plates are held apart by the thickness of the gear to the extent that the nuts affixing the backing plates do not reach the threads on the axle..I removed the speedo drive gear to double check, and confirmed that is creating the issue..
Is there anyone who has fitted these brakes who can help?...
With the speedo drive gear in place the backing plates are held apart by the thickness of the gear to the extent that the nuts affixing the backing plates do not reach the threads on the axle..I removed the speedo drive gear to double check, and confirmed that is creating the issue..
Is there anyone who has fitted these brakes who can help?...
Last edited: