Misc: Carburettors Float Chamber Top

bmetcalf

Well Known and Active Forum User
VOC Member
On my 2-3 year old rear Shadow carb float chamber top, the brass part has come loose from the pot metal top. There are remnants of adhesive at the mating surface. I cleaned that off and applied Hylomar to seal it. The cutouts on the brass flange underneath engage with the tickler/pinch bolt bosses to keep it from rotating more than a few degrees. I've pulled the brass part snug with washers and the banjo nut (no part number?) and am letting the Hylomar cure.

Anything else I should do?

Banjo.png


The Parts List on the CE site and the Burlen website don't have a part number for that nut; I thought they were available? I looked more and VOCSC calls it a PR5J.
 
Top