• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Engineering Stuff

Phil Baker

Well Known and Active Forum Website User
Non-VOC Member
I've been having a lot of trouble with plug-fouling and oil in the combustion chamber on the Comet and Stumpy Lord suggested that I should send my muff, liner and piston to Simon Linford in Scotland. Simon found many problems and supplied, fitted and bored out a good second-hand liner and fitted it to my muff. He drilled small, angled holes in my RAK Omega piston to encourage oil drainage and I had it all back within the week. His prices are very reasonable, he seems to be a decent bloke and I recommend him. His number is 01828 640525.

Thanks to Clev Trev for his advice and input again. Also to Stumpy - helpful and knowledgeable as ever!

Phil (Basingstoke Comet being reassembled.... again...)
 

Ken Tidswell

Well Known and Active Forum Website User
VOC Member
Any job I have sent for Simon to do for me has come back or been done in a short time. He is set up to do things like bottom links.
The Vincent courier service works well to Meigle where he lives. It helps if you live in northern climes. I went to a Perth lunch and it was done by following Wednesday.
 
Warning! This thread is more than 10yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Top