• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

clutch cover c28/1

metal bits

Forum Website User
Non-VOC Member
can any body tell me the out side diameter of the clutch cover c28/1 on the black shadow
are there any proper engineering drawings with dimentions for the twin any were


Well Known and Active Forum Website User
VOC Member
I measure 7.377" or 187.39 mm. This will vary as the Shadow casting is left rough and painted and I measured a polished cover.

There are drawings available, but not to the members, suppliers only.

Warning! This thread is more than 11yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.