• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Cam sleeve dimensions

R

Ray Bear

Forum Website User
Non-VOC Member
Can someone advise me to the overall length of the PD4/2 cam sleeve and the length of the shortened PD7/2 Nut..
Also how much travel does the ESA with the above mods have until it bottoms out , I assume its around 1/4 of an inch ..Thanks for all replies, Bill
 
T

Tom Gaynor

Well Known and Active Forum Website User
VOC Member
Know Thy Beast says if converting a C to the D ESA, the C nut can be shortened to 23/32" overall. (I just bought new.) All it has to say about PD4/2 is that the D sleeve is shorter than the C sleeve, and since the sleeves are hardened, a new D sleeve, PD4/2 will have to be purchased.
I don't know what "the stroke" is, somewhere between 3/8" fully closed up, and 1/4" I imagine, but whatever, not so great that the two cams can go "head to head" and jam.
Ray Bear said:
Can someone advise me to the overall length of the PD4/2 cam sleeve and the length of the shortened PD7/2 Nut..
Also how much travel does the ESA with the above mods have until it bottoms out , I assume its around 1/4 of an inch ..Thanks for all replies, Bill
Click to expand...
 
Warning! This thread is more than 11yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Top