• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

10tt9 carb referb

I.WISH

Forum Website User
Non-VOC Member
I have a pair of 10tt9 carbs with worn bodies makes for all sorts of running issues can anybody recomend where to go to get them refirbed many thanks
 

vibrac

Well Known and Active Forum Website User
VOC Member
To be honest Bill think twice
I thought I had a good TT with a well fitting slide on the Racer but it was only when I got a new TT I realised just how imperceptibly worn that alloy gets in all sorts of places the new one provided a crisp action
I have to use a TT because the class cut off is 1949 but I think the design is still good, lots of replacements were made to new carbs just because the TT's were clapped not because the new ones were that much better design
There are new bodys available now (but not float chambers) go on treat yourself...
 
Warning! This thread is more than 11yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Top