What are the pivot spacer widths of the F112 and F103 where the FT33 (Pivot Bearing Spindle) runs through them?
Thank you all,
Brad.
Thank you all,
Brad.
F: Frame F112 & F103 Pivot spacer widths
- Thread starter Bradley Burt
- Start date
Hello Bradley, So we are talking Comet,
Bit tricky !, The F103 is a special bracket, Like a triangle, So not really just a spacer,
It's held on the Back of the inner Primary chain case by 4 x 1/2" long 1/4" BSF Countersunk screws,
Punch locked or loctited !!.
All in it's about 3/4" But that is including the plate with a spacer made of steel, All in one !.
The Twin does not have this !.
The other alloy spacer the other end is about 5/16". To pack out the rear frame member.
Cheers Bill.
Just to show you what it is F103, About £116 VOC Spares,
There might be one on UK ebay ?.
Bit tricky !, The F103 is a special bracket, Like a triangle, So not really just a spacer,
It's held on the Back of the inner Primary chain case by 4 x 1/2" long 1/4" BSF Countersunk screws,
Punch locked or loctited !!.
All in it's about 3/4" But that is including the plate with a spacer made of steel, All in one !.
The Twin does not have this !.
The other alloy spacer the other end is about 5/16". To pack out the rear frame member.
Cheers Bill.
Just to show you what it is F103, About £116 VOC Spares,
There might be one on UK ebay ?.
Attachments
Last edited:
Thank you Bill.
Thanks David, Good Guess !, Hard to tell when bike is together,
And jammed up to the wall !.
Cheers Bill.
And jammed up to the wall !.
Cheers Bill.
How's that , ! For , This Forum !!,
Question asked from Bradly in AUS,
Replied to from UK,
And Double checked and OK ed from David in USA.
All in 24 hours !!,
Who would have thought that was possible , MAGIC .
Question asked from Bradly in AUS,
Replied to from UK,
And Double checked and OK ed from David in USA.
All in 24 hours !!,
Who would have thought that was possible , MAGIC .
Yes, THIS forum is really great isn't it, in terms of instant access to information and social interaction, probably one of the best things that has been introduced over the past few years, lets hope it continues well into the future, THIS club would be poorer should we lose THIS forum.