Hi Charlie,
When I did the kit on both my Comet, and my dads, we used M5 countersunk screws, but in the USA it would probably be easier to use 10/32" UNF or similar.
It all depends on what you can get from either someone like Autoquest or Home Depot
Also use a good jointing compound on the back of the alloy seal carrier.
Best of luck
Neil
When I did the kit on both my Comet, and my dads, we used M5 countersunk screws, but in the USA it would probably be easier to use 10/32" UNF or similar.
It all depends on what you can get from either someone like Autoquest or Home Depot
Also use a good jointing compound on the back of the alloy seal carrier.
Best of luck
Neil