Misc: Everything Else Egli oil level

[vibrac]

If there is one thing worse than no knowing something its knowing you knew something but have forgotten it,
Years ago I found out the correct oil level for my Egli CTG frame. Its the type with a loop of oil return pipe at the front and a single 3/8" (ish) hole in the filler tube at the bottom.(The one that only passes new oil in slowly or quickly overfills) I made a dip stick to drop into that hole with a upper and lower limit unfortunately that in conjunction with the original information has gone.
does anyone with a CTG frame know the measurements for oil levels?

 

[Howard]

My frame's a Slater Egli. It used to have the layout you describe, but I changed it years ago. The oil level should be the same. My homemade dipstick rests on the bottom of the oil tank and has low and high notches at 60mm and 80mm. Hope that helps.

 

[Bill Cannon]

Tim my "Fritz" Egli has the level tube at the front and not knowing any better I always run it at just below the half way point.
Bill