Hi Greg, Have you asked Conways? steve@conway-motors.co.ukWell I took the bike for a good blast today, ....... This bike has enough power that the Conway's Honda clutch can barely hold the torque even after I shimmed up the springs...........Does anyone know if stronger ones are available.........?
Also this may help - The Conways Clutch Kit for Comet uses a clutch from a:
- Honda CB360 G/T 1974-1976
- Honda CJ360 T 1976-1977
The EBC Friction plate set is EBC part # CK1132
The EBC Clutch Spring Kit is part # CSK082.
EBC can also supply a special tool used to allow positive holding of the clutch basket and center allowing removal or refit of the clutch basket center securing nut.. It is EBC part # CT009
The Plain Metal drive plates are Honda part # 22321-357-0 10
Barnett Clutches in the USA also can supply replacement parts suitable for the Honda clutch used in this conversion. www.barnettclutches.com
The plain metal drive plates are Barnett part # 401-35-047002
The friction plates are Barnett part # 301-48-10001
The clutch springs are Barnett part # 501-66-04010
Good Luck. M
Last edited by a moderator: