Sitting here on this ex - milking stool ( repaired ) I am looking at the two Brake Drums you see in the Photo`s.
Both are Plain Vincent , have 10 holes and are " normal " thickness and outside diameter.
However the left Drum has every other hole at 5/16 inch , the remainder at 1/4 inch : 10 holes at 5/16 inch on the other Drum.
The Hub Diameter on the L/H Drum is 2 inch , the other at 2.3 inch with the god awful thin bit which can crack !
What`s the story , what machine did the left hand Drum come from ? Someone from around the world in Vincent land has the answer.
Both are Plain Vincent , have 10 holes and are " normal " thickness and outside diameter.
However the left Drum has every other hole at 5/16 inch , the remainder at 1/4 inch : 10 holes at 5/16 inch on the other Drum.
The Hub Diameter on the L/H Drum is 2 inch , the other at 2.3 inch with the god awful thin bit which can crack !
What`s the story , what machine did the left hand Drum come from ? Someone from around the world in Vincent land has the answer.