• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

wiring loom


Well Known and Active Forum Website User
Non-VOC Member
who does the best wiring loom for twins out there? i've already bought two differnt types that are not very well made so keen to know other forum folks experiences.

Graham Smith

Forum Website Webmaster
VOC Member
VOC Forum Website Administrator
I know it doesn't answer your question about Twin looms, but I bought one for a Comet last year from the Spares Company, and it was brilliant.

A couple of people had told me to make my own up, as the shop bought ones had to be adjusted to fit, but this wasn't the case - it was a perfect fit.


Forum Website User
Non-VOC Member
I made my own, using a couple of meteres of 5 core auto wire, a handful of terminals and followed the diagram in the spares sheet. All finished in an afternoon, cost: less than a slab of beer!


Well Known and Active Forum Website User
VOC Member
I can agree with Graham. I bought a Spares Co. loom for my Comet and it fitted beautifully. I wouldn't waste your time making one for how much a pre-made one costs.

Warning! This thread is more than 15yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.