• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Vincent HRD Mercury Crest Vinyl transfers

Vbert

Forum Website User
Non-VOC Member
Hi does anyone know where you can get "Vincent HRD" mercury crest vinyl transfers ? I know you can get 'HRD" and "Vincent Engineers" . Also does anyone know the transition eng Numbers ?

Thanks

Bert
 

Albervin

Well Known and Active Forum Website User
VOC Member
Do you mean the Mercury crest for Series B and early C machines? Vinyl is quite thick and Mylar is now available from some suppliers. Try dmurdock@motographix.com.au they are in NSW.

 

Shanghai

Well Known and Active Forum Website User
VOC Member
Do you mean the Mercury crest for Series B and early C machines? Vinyl is quite thick and Mylar is now available from some suppliers. Try dmurdock@motographix.com.au they are in NSW.

Alyn, I used Motographix for the Tilbrook decals. They did a great job, highly recommended
 

1660bob

Well Known and Active Forum Website User
VOC Member
Speaking of mercury crests- i am about to apply same to a newly stoved headstock, the crest is from the spares scheme and i presume is a waterslide type- i intend to laquer over it after- any do`s /don`t /pitfalls to avoid regarding this?? Thanks in anticipation, Bob.
 
Warning! This thread is more than 11yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Top