• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Vernier Cam

davidd

Well Known and Active Forum Website User
VOC Member
I thought that some might be interested in seeing this Vincent cam. Quite a piece of work.

HamelCam_1.jpg


David
 

roy the mechanic

Well Known and Active Forum Website User
VOC Member
The cam looks like the Terry Prince mk 4 which i have selected for mine. The vernier part seems a bit O T T if you know how it's not that difficult to do the cam timing. But it may save a couple of hours on the build time. looks nice, where are the bearings?
 
Last edited:

davidd

Well Known and Active Forum Website User
VOC Member
I have another shot of a cam with the bearings. It is a needle bearing set up.

The lobes do not look like the lobes on my Prince MK4 cams. The lobe is Harley aftermarket design. Vincent cam followers will not work on this design.

The cam is Steve Hamel's

David
 
Warning! This thread is more than 10yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top