Hi All,building a basket case, so no idea what the accepted practice is for routing the above cables uner the tank. In particular, the throttle cables :does the splitter box reside on the offside or nearside of the oil tank? How does clip FT183- work-mine appears to be a simple flat strip bent into a `j` and with the FT184 screw done up tight the clip does not hold the junction box at all-(other than by gravity)it seems to have no fastening ability at all?? Does FT183 point outwards, or inwards- to hold the splitter box in the space between the oil tank lower front edge and the recess in the steering casting? I have what seems to be an original throttle cable, but the adjuster for the rear carb is some 3-4" from the carb top and thus ideally would be between fuel tank inner wall and oil tank but its too narrow a gap there and the adjuster gets trapped ???? Any info appreciated, cheers, Bob .