• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Threads on rear seat mount

youngjohn

Well Known and Active Forum Website User
Non-VOC Member
Does anyone know what the thread is on the rear 'eye bolts' which mount the rear of the seat to the tubes attached to the friction dampers? Thanks.
 

chankly bore

Well Known and Active Forum Website User
Non-VOC Member
And some of them didn't have the smaller hexagon,probably depending on what was in the parts bin at the time!Standard dimensions of thin nut are;.600" hex.,.208" thickness,30 degree chamfer both sides.Smaller hex. is .525",.166 thickness, same chamfer.
 
Warning! This thread is more than 12yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Top