• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Terry Prince Vincents

davidd

Well Known and Active Forum Website User
VOC Member
As far as I know, Terry does not manufacture complete bikes or even complete kits any longer. He gave up building frames about ten years ago due to lack of demand. The TPV shown on the site was a joint venture that produced a few machines, but production was short.

Terry continues to supply crank assemblys that are top notch and the cyclinders, heads and pistons that were provided on the TPV machines. I believe he can supply the comonents or completely assembled heads. The cylinders and heads have extra finning and the heads are essentially modern "big port" heads. All parts are interchangeable with stock parts. Terry uses different studs to get the clearance for the larg displacement cylinders. Terry also supplies a variety of cams and many other parts.

David
 
Warning! This thread is more than 11yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Top