• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Series C front fork


Well Known and Active Forum Website User
VOC Member
:confused: What is the correct distance between the fork blades were the front axle fits??
Mine measures 6 3/16". Yet the wheeel axle measures only 6". I know that some adjustment can be made with shims between the brake plate and bearing , but not this amount. Any suggestions!!!


Well Known and Active Forum Website User
VOC Member
Front forks

Hello, Not had time to measure yet, but would suggest that the brake plate nuts usually have threads showing when tight. This will take up some of the difference. John.

Robert Watson

Well Known and Active Forum Website User
VOC Member
From Measuring about 6-8 sets that either are or have been in my posession
All Brampton and Girdraulics at 6" - 6 1/16" except TTR forks (Pre war Bramptons) at 6 3/8".

Warning! This thread is more than 15yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.