1”
The repro ones I bought are 7/8”
Bill
The repro ones I bought are 7/8”
Bill
I think these may be A levers. They are for one inch bars. The holes center to center are one inch. The threaded hole is 1/4 BSF. They are six inches long, made of brass or bronze. I was hoping to find the rest of the bike one day.View attachment 24712View attachment 24713View attachment 24711
I will have a set too please Peter, Do they come with the clamp horizontal so the advance/ retard /choke levers fit directly above, as I feel with all levers and individual clamps crowd the bars up too much. Will they be supplied with the square headed clamp screws ?
bananaman.
I'm not sure they are original A as they are handed as in they are a brake and clutch lever. Originally they were just one side (not sure which)...
I could be wrong of course though.
Mark
I'm not sure they are original A as they are handed as in they are a brake and clutch lever. Originally they were just one side (not sure which)...
I could be wrong of course though.
Mark