• Welcome to the website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Hon. Editor and Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this website.

    If you have previously registered to use this forum, you should log in now. CLICK HERE.

    If you have never registered to use this website before, please CLICK HERE.

PR: Proprietary Items rev counter drive

vibrac

Well Known and Active Website User
VOC Member
I bought a rev counter off ebay india made so cheap it was worth a punt (Royal Enfield) it works fine and correctly with the right ratio. Using a power drill on the Vincent angle drive ie from the inside of the rev counter cover with the drill and a forked bit. With the chuck looking at the end going clockwise (same as the ATD) it drives the existing 3" rev counter on my Flash OK. unfortunately to get a reading from the indian rev counter I have to reverse the drill so I think what I need is a 2:1 non reversing gearbox as fitted to the 5" jobbies am I right?
I am driven to this position by the requirement for a mechanical rev counter on the twin for our race series
 

Top