Rapide 928 jetting etc


Well Known and Active Forum User
Non-VOC Member
I'm slowly getting things done on the rap, but keep getting sidetracked with other things too (broken kickstart return spring, leaking fuel taps etc...)
I made some notes a few weeks ago (from someone's post I thought) but I cant find all the info now, and all I wrote was '20 pilots, 105 needles'.
Essentially, I 'just' want to check the recommended jetting please.
I've only dropped the front carb so far:
190 main, #3 slide, middle clip on 2-id-groove needle, no pilot jet

Also, both carbs had a gasket in tandem with the o-ring, and both gaskets had blown in, so I'm going to see if they will seal without gaskets as I don't think they should be there.