• Welcome to the website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Hon. Editor and Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this website.

    If you have previously registered to use this forum, you should log in now. CLICK HERE.

    If you have never registered to use this website before, please CLICK HERE.

Part number 30

Bracker1

Well Known and Active Website User
Non-VOC Member
I have a quick question on a part, specifically part number 30, a 3/8 inch long grub screw. Were on the bike is this used? I can't remember ever seeing this screw on the engine. It looks like a plug of some sort. I assume it is of some importance and of course it is sitting on the work bench and not in the bike. Cheers, Dan
 

timetraveller

Well Known and Active Website User
VOC Member
You do not say what the thread is but it sounds like a blanking plug, either for the top rear of the timing cover or the bottom of the crankcase. There are oil galleries at both locations which need to be blanked off. Cheers
 

Bracker1

Well Known and Active Website User
Non-VOC Member
Thanks for the answers. It was at the bottom of the crankcase, timing side. I have no idea why or when I took this off. The forum comes through again. Thanks again, Dan
 
Top