• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

OMEGA Piston Rings

Martyn Goodwin

Well Known and Active Forum Website User
VOC Member
Anyone know a source for rings for a 0.020” oversize Omega piston? I seem to recall some mention of Honda rings but cannot find the reference.

Martyn
 

Martyn Goodwin

Well Known and Active Forum Website User
VOC Member
I have discovered that JP Pistons in Australia can supply piston rings for almost any piston

They can be contacted at pistons@jp.com.au. They need to know each ring grove depth and width and also the finished size of the bore. This IS NOT an endorsement - just some info for the record.

Martyn
 

Robert Watson

Well Known and Active Forum Website User
VOC Member
Somewhere I have the part numbers for the Honda rings. It should be noted that the top two rings fit right in but the Honda oil ring (three piece) is narrower than the Omega. I generally have just used the Omega oil rings.
 

Martyn Goodwin

Well Known and Active Forum Website User
VOC Member
Just closing the loop. I was able to source a set of rings direct from OMEGA in the UK. Kicker is that the freight was twice as much as the cost of the rings.

Martyn
 

vibrac

Well Known and Active Forum Website User
VOC Member
Just closing the loop. I was able to source a set of rings direct from OMEGA in the UK. Kicker is that the freight was twice as much as the cost of the rings.

Martyn

should have bounced them via a UK member Martyn (and recompensed them by pay pal :))
 
Warning! This thread is more than 9yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Top