• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Number Plates

Old Bill

Well Known and Active Forum Website User
VOC Member
Time to get some new number plates made for the bikes. Any recommendations re suppliers would be gratefully received.
 

roy the mechanic

Well Known and Active Forum Website User
VOC Member
Ready made plates are not a legal neccesity. Signwritten ones are acceptable provided the sizes of the characters is correct as per c+u regs.
 

BigEd

Well Known and Active Forum Website User
VOC Member
VOC Forum Website Moderator
A local bike shop had some stick on white numbers in the appropriate size when I made up my rear plate. (Wish I had the talent and a steady enough hand to be a sign writer.:))
Ready made plates are not a legal necessity. Sign written ones are acceptable provided the sizes of the characters is correct as per c+u regs.
 
Last edited:

Old Bill

Well Known and Active Forum Website User
VOC Member
Many thanks for the information, my personel preforance is for the pressed aluminium type which Framptons manufature, so once again thank you.
 
Warning! This thread is more than 11yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Top