T: Fuel Tank New Project

[oexing]

When deciding on fuses you have to look at the wire gauge AFTER the fuse that you want to protect. NO good idea to have one big fuse and a few lighter gauge wires after the fuse so in case of an earth short these wires will go up in flames before the fuse blows. So big fuse only with big wires, lower amps fuses after a main fuse for lighter gauge wires to individual electrics.

Vic

 

[Vincent Brake]

thats to guard your alton and the rest.

there is a current running there from the regulator to the battery, that will do. but if wired to german 2020 standards, it would just do without.

than could use UL gauge wire, (insulation is thicker)

i just bought me some, as there was a machine sold to T. land

 

[timetraveller]

With the later Walkernators I supply enough 40 amp cable to go from the alternator to a headlamp mounted ammeter and back to the battery.

 

[erik]

 

[erik]

Kickstarter is Ready.An XT500 Kickstarter is converted to siut the burman box.

 

[erik]

 

[erik]

this will be the brake pedal.

 

[erik]

 

[erik]

 

[erik]

The mudgard is strengthened by a second layer riveted to the inside.