When I fitted the Mk2s to the solo the front one constantly flooded. After much head scratching the problem was fixed by cutting the ears of the float bowl gasket. These had been trapping the float spindle which was tight in the nylon float. To be on the safe side I reamed the pivot holes in the float as well.
5 years later the rear started to flood, so off with its ears too, it still floods, so change float bowl, float needle, and float, it still floods. Has any one any helpful hints? I see that there is something call a stay up float available any thoughts on that? John
5 years later the rear started to flood, so off with its ears too, it still floods, so change float bowl, float needle, and float, it still floods. Has any one any helpful hints? I see that there is something call a stay up float available any thoughts on that? John