• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Macdougalator information

Bill Cannon

Well Known and Active Forum Website User
VOC Member
Can anyone tell me the diameter of the rotating drum of a Kubota alternator please?
I am considering driving it off the smooth side of a toothed belt!

Regards Bill
 

Bill Thomas

Well Known and Active Forum Website User
VOC Member
Sorry I have told you a Mcdouglator, Is that the same ? You know there is a big load on it and John has built in a slipper clutch, Cheers Bill.
 

sidmadrid

Well Known and Active Forum Website User
VOC Member
Bill, still using the original dynamo on the vin. Kubota fitted to the Morgan.
But the Macdudalator is a good bit of kit, only I still use a magneto and don't go out at night, much.
 

Vincent Brake

Well Known and Active Forum Website User
VOC Member
indeed a perfect piece of work, and during daytime 60 watts H7 is ok for days and days of driving.
I have it set up with a Pazon. No shit any more with our "own make", B--H, or the old A--s, (have to say the new ones are the best) drive it already for 21000km.
drive well Vincent
 
Warning! This thread is more than 8yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top