A: Oil Pipework Leaky Banjos

coomo

Active Forum User
Non-VOC Member
thanks for all the replies guys.Firstly, I removed the inserts that hold the bolt.Then tightly jammed in a piece of rag,smeared with grease.I used a tiny file to draw file the casting.I filed the hard nickel mating surface of the banjo, till I was left with the copper substrate,which I used engineers blue,and a block to even out.Then a smear of high temp silicone sealant.
if that doesnt seal,I will turn a few thou off the top of the insert.failing that Bolt with longer thread,& investigate the Neal Videans Kit
 
Top