HB: Handlebars Indicator switch

Jim Bush

Well Known and Active Forum User
VOC Member
I used this horn/hb/direction indicators. Amazon purchaes

I also fabricated a single - double perch for the clutch and decompression lever so there is only one clamp.
 

Attachments

  • 20200716_110432.jpg
    20200716_110432.jpg
    297.8 KB · Views: 54

danno

Well Known and Active Forum User
Non-VOC Member
Danno,

Check out Paul Geoff's offerings.


Thanks. Yes have checked those out.
I have the £15 chrome one for indicators but with an added horn button.
 

danno

Well Known and Active Forum User
Non-VOC Member
The other side has the starter button and seperate light beam switch. The throttle clamp and starter arrangement may be one that’s included in the the Grosset kit.
Easiest things to operate are the flashers, horn and starter.
I have to stretch to use the decompression lever and also the hb switch.

The clusters on Paul Goff’s site are quite pricey but would free up 5mm on the LH side.
Cheapest way is to try and modify the switch backplate as Greg brillus suggests so it can overlap the brake lever bracket.
 

Attachments

  • 0E6F7695-3236-40AE-988C-BA143ADC6785.jpeg
    0E6F7695-3236-40AE-988C-BA143ADC6785.jpeg
    329.6 KB · Views: 40

bmetcalf

Well Known and Active Forum User
VOC Member
Here is my switch, a Miller copy. It could move left 1/2" maybe, but I hadn't thought about it until I took the picture.

Dip Sw.jpg
 

Martyn Goodwin

Well Known and Active Forum User
Non-VOC Member
Here are mine - found on ebay. cheap as chips, still working strong after at least 8 years. Indicator first, then the combined hi-lo headlamp and horn.


P1010983.JPG
P1010984.JPG
 

vibrac

Well Known and Active Forum User
VOC Member
My valve lifter is a little trigger lever about an 1-1/2" long it's all you need for a royal Enfield lifter in the head
I must have got it from somewhere I guess it may be original RE?
 
Top