• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

H12/3

vibrac

vibrac

Well Known and Active Forum Website User
VOC Member
I am looking for a scrap rear brake arm it only needs to have the embeded serrations and about 2 inches of the arm from the pivot hole. the rest can be scrap I need to make a G108/1 for the Flash and it seems sacrilege to cut up a good brake arm.
 
Warning! This thread is more than 11yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Top