• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Grease nipples

John Cone

Well Known and Active Forum Website User
VOC Member
Could someone please tell me whether the grease nipples on the front & rear brake actuating shafts are threaded in or a press fit. if threaded what size and thread is used? i suspect it would be easier to obtain new grease nipples than find a grease gun to fit.
 

Robert Watson

Well Known and Active Forum Website User
VOC Member
I have been looking for some of those "old style" grease fittings, I would gladly pay the postage is someone had a few they could send me, even as many as a couple of dozen.

Thanks
 

nkt267

Well Known and Active Forum Website User
VOC Member
The problem with turning down the modern type of greaes nipple is that you will lose the non return ball that stops the grease coming back out..John
 
Warning! This thread is more than 11yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top