• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Misc: Stands Front stand spring

Michel

Well Known and Active Forum Website User
VOC Member
Good evening,
I have a very very important question ;-)
I have a Comet Serie C from 1950. Which spring I need: FT119 (short one) or FT120 (long one) ?
Have a nice week-end.
Michel.
 

Len Matthews

Well Known and Active Forum Website User
VOC Member
Good evening,
I have a very very important question ;-)
I have a Comet Serie C from 1950. Which spring I need: FT119 (short one) or FT120 (long one) ?
Have a nice week-end.
Michel.

The Spare Parts List shows 2 FT120 for Comets. One of them is stretched between each of the Propstand legs. The other is used to pull the legs down as a pair to serve as front stand after removing the magneto cover and the 5/16" bolt from the left hand engine plate. Another design feature that sets Vincents apart from the rest.
 
Warning! This thread is more than 9yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top