1. I'm trying to get the front stand to work on a series C. There seems to be a stop missing, so when you loosen the set screw to swing it forward, it doesn't stop in the vertical position. I bought FT 123 from the VOC, but firstly it seems too big for the hole in the rh engine plate, and secondly it's too short to engage with the flat part on FT 119. What should be here, is there a trick I'm missing?
2. Also, any suggestions on the prop stands. They seem almost useless, because of the extreme angle they prop the bike up at. I saw a picture of the Shadow that the spares company built, and the prop stand seemed to work ok there. Is there an adjustment, modified part that improves things.
Thanks for any help on these two points.
Ducvelo
2. Also, any suggestions on the prop stands. They seem almost useless, because of the extreme angle they prop the bike up at. I saw a picture of the Shadow that the spares company built, and the prop stand seemed to work ok there. Is there an adjustment, modified part that improves things.
Thanks for any help on these two points.
Ducvelo