• Welcome to the website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Hon. Editor and Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this website.

    If you have previously registered to use this forum, you should log in now. CLICK HERE.

    If you have never registered to use this website before, please CLICK HERE.

F264 & F257


Michel

Well Known and Active Website User
VOC Member
Other,
Can you tell me if the spacer F264 dimensions are identical to spacer F257 ?
If not, what are the sizes of these two spacer
Thank you.
 

A_HRD

Well Known and Active Website User
VOC Member
Michel is referring to the Series A 500cc oil-tank and toolbox top lug spacers. (Page 41 ASL). I don't have physical access to the lengths at the moment, but I can tell you from an excellent Glenn Shriver sketch that they are 1.5 inches long for the toolbox and 1.25 inches long for the oil-tank. All bolted-up through the frame by a 5/16 dia stud, 4-7/8 inches long, with CEI threads at each end about 0.5 inches long.
Peter B
 

Michel

Well Known and Active Website User
VOC Member
And there is (in my opinion) another 5/16" stud through both sides of the frame and which bolts together the bottom of the toolbox and the bottom of the oil tank (This stud is not drawn on the sketch page 41 ASL). Do you know its total length, I think around 9"1/2 ?
 

Top