Should've written 1.25" valve travel. Stu.
Hi Greg, I had heard of the need to relieve the rockers clear the inner nuts. I am hoping that the new rockers I purchased from the spares co. are relieved enough, they are advertised as such.View attachment 25436
I also purchase new rocker pins. They appear to have a bevel on them, do you think this is sufficient or should aim for a bit more?View attachment 25437
I was consider making stepped pin to guide the new rocker pin as it is pressed in or even a threaded one that I could gently draw it in with. I was also thinking about warming up the rockers in an old toaster oven and chilling the pins in the fridge along with a little light lube. Thoughts?
Steven