Misc: Everything Else Electrical and Cable Routing

D

Dynamiteboss

Active Forum User
VOC Member
Richard Gibson here, from Rockford, Illinois, USA. 1951 Black Shadow.

I am looking for info on the correct routing of all control cables and wiring.

can anyone point me in the right direction?

Best regards.
 
G

Graham Smith

Guest
From our massive archive of information built up over nearly 15 years…

The Mighty Garage - 1951 Vincent Rapide - Part 044: Cable Routing

@Mike T 's journey with his 1951 Rapide.
www.vincentownersclub.co.uk www.vincentownersclub.co.uk

Misc: Everything Else - Routing of cables on a 1951 Rapide

The renovation of my Rapide has progressed to fitting the throttle cables etc etc. Is there any definitive information on the correct routing of all cables ....... and come to that routing of the wiring harness ( although I guess this will naturally work itself out. Thanks Phil Arundel
www.vincentownersclub.co.uk www.vincentownersclub.co.uk




Cable routing - Comet

What is the correct way - that is how was it done originally, to route all of the control cables on a "C" Comet? The brake and carb cables are obvious however I am very uncertain as to how to correctly route the clutch and decompressor cables. Exactly how should they be positioned? Thanks...
www.vincentownersclub.co.uk www.vincentownersclub.co.uk

throttle/choke/clutch/decompressor cables-best routes?

Hi All,building a basket case, so no idea what the accepted practice is for routing the above cables uner the tank. In particular, the throttle cables :does the splitter box reside on the offside or nearside of the oil tank? How does clip FT183- work-mine appears to be a simple flat strip bent...
www.vincentownersclub.co.uk www.vincentownersclub.co.uk
 
Top