• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Early Vincent panniers

craig

Well Known and Active Forum Website User
VOC Member
I need help in fabricating a set of early panniers. i need photos of these bags please. I have M043, M044 and KTB. I need -
dimensions for the bag
bag hinge details
photos of brackets
can any of this be found without my fabrication?
thanks
Craig


rightsideluggage.jpg
 

fgth130

Active Forum Website User
VOC Member
Craig,
Full details, description, dimensioned drawings and photos can be found in a 6 part article in MPHs 533 thro 538, June - November 1993; hope this helps, best of luck!
Frank Griffin
 

dashow

Forum Website User
VOC Member
If you come across the lower mounting bracket per the MPH I would like to borrow to have it recast in Asia where I live part time. I can than give you first born, and make them available AT MY COST. I have a few pair of the under the seat brackets for a fiver each if you need them
 

craig

Well Known and Active Forum Website User
VOC Member
dashow, i am on the hunt for all these pieces. It would appear that a B20 with an alloy nipple of the right dimension simply epoxied on would give a pattern for casting, but just my guess right now. I am considering a B20 with a machined FT111 (rear seat stay) or FF57 might be a good choice as well. The OEM casting would be best however. I will PM on the brackets , thanks
Craig
B10L_B20.jpg
 

craig

Well Known and Active Forum Website User
VOC Member
Hello PanFans, I have recieved great info from Vincent riders desiring these panniers. One item I would like more info about is the alloy channel used for the lid. I have all the MPH articles, but the alloy channel exact size and configuration is not addressed. Have I missed something? Does anyone own a set of these early bags that can give us more detail?
Cheers
Craig
 
Warning! This thread is more than 12yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Photos from the 2022 North American Rally

Photos from the 2022 Far Far North Rally

Photos from the 2022 Annual Rally

Photos from the 2022 French Rally


Top