• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Dual air levers


Forum Website User
VOC Member
On my series C black shadow, I'm looking to change out the more modern carbs for the Amal premonoblocs. I looked at the Spars co. The dual air levers are not offered. I found online several replicas however; online the quality is suspect. Anyone find a source that they are happy with the quality for these levers?

Robert Watson

Well Known and Active Forum Website User
VOC Member
Take a look at this site. They go to Stafford and a lot of the big shows around Europe.I have found their stuff superb..John

I just got a set of solid brake and clutch levers for 1" bars from them for the A twin. They were less money than rechroming old ones would have cost. They had a couple of very minor issues - the slot for the cable was slightly too narrow for the cable to fit through, I think from the chrome, but easily rectified.
Warning! This thread is more than 9yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Photos from the 2022 North American Rally

Photos from the 2022 Far Far North Rally

Photos from the 2022 Annual Rally

Photos from the 2022 French Rally