Risada,
There are lots of bearings on the Vincent crank shaft. Do you have a single or twin? Are you replacing the pin and bearing that holds the connecting rod?
The bearings for everything but the connecting rods are below. There is an SKF bearing number, but the suppliers will use the RHP numbers because those are the bearings that they have in stock.
| | | | SKF
| RHP
|
B & C Mainshafts
| Drive-side Ball
| E91
| 1 x 2-1/2 x 3/4
| RMS8
| MJ1JC3
|
| Drive-side Roller
| ET92
| 1 x 2-1/2 x 3/4
| CRM8
| MRJ1JC3
|
| Timing-side-Inner
| ET92
| 1 x 2-1/2 x 3/4
| CRM8
| MRJ1JC3
|
| Timing-side-outer
| ET94
| 3/4 x 1-7/8 x 9/16
| CRL6
| LRJ3/4JC3
|
David