I ran the Comet for 7-8 miles yesterday. First road time since 1969. 50F sunny weather. Started with comp closed, i opened the comp and it smoothed out quickly. No idle , must blip as needed.
1-3/16" 10TT9
109 needle jet
#7 slide
320 main
My concern is gasoline leaks out the three air holes at the carb base when coming to an engine shut off stop. I think the float needle is leaking thru. I dont see spares for this fix, can i use some grinding compound to seat the soft aluminum needle in the soft seat? Or what is best?
The three air holes actually look like they are below fuel height of the float bowl.
Any 10TT9 experts out there?
Thanks
Craig
1-3/16" 10TT9
109 needle jet
#7 slide
320 main
My concern is gasoline leaks out the three air holes at the carb base when coming to an engine shut off stop. I think the float needle is leaking thru. I dont see spares for this fix, can i use some grinding compound to seat the soft aluminum needle in the soft seat? Or what is best?
The three air holes actually look like they are below fuel height of the float bowl.
Any 10TT9 experts out there?
Thanks
Craig