• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Comet Timing Gears

cometbaz

Forum Website User
VOC Member
I have recently changed the alloy idler gears on my comet for steel ones. All the timing marks lined up on removal and on fitting the new gears. The only problem I can see is with the breather cog as when the "B" mark is just leaving the "B" mark on the large idler, the slot in the breather is at 2 o'clock and not pointing straight down as per diagram. Should I set it to the "B" mark or with the slot pointing down.
 
Warning! This thread is more than 15yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Top