• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Comet clutch cable

derek

Well Known and Active Forum Website User
VOC Member
Could anyone tell me the thread size of the cable abbutmen into the standard Comet gear box. I think that it may be an adjuster, but the standard cable that I bought, is just a plain cable end. Thanks Derek.
 

Comet Rider

Well Known and Active Forum Website User
VOC Member
Comet Clutch

Hi Derek,

Len is correct, but in some cases there is a 3/8 diameter BSF thread there. This could give you another means of adjustment, but it is very difficult to get to.

Neil
 

derek

Well Known and Active Forum Website User
VOC Member
3/8"CEI correct.

:)Thanks every one yes mine is standard @3/8" CEI, the reason I needed to know was that paint had clogged the threads and the gear box was fitted and difficult to get to with a tap.
Thanks Derek.
 

Chris.R

Well Known and Active Forum Website User
VOC Member
I need to make up a comet clutch cable longer than standard what is the wire diameter required I read cabe is available as #1-2-3 mine mikes as 2mm?
 
Warning! This thread is more than 3yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Photos from the 2022 North American Rally

Photos from the 2022 Far Far North Rally

Photos from the 2022 Annual Rally

Photos from the 2022 French Rally


Top